用途

◆ 适用于挂镀前处理、电镀、后处理……全工艺流程。适用中、小（15KG以下）工件的大批量生产。

特点

1、电机采用变频器控制，运行平稳可靠，操作维修方便、简捷；

2、连续作业，生产效率高，产量大；

3、生产过程中，各工序的时间固定，工件品质稳定；

4、传统手工电镀中，各个工序由人工完成的频繁的起落挂具的工作，由自动电镀生产线的移动悬臂代替完成，大大降低了劳动强度，节省劳动力，并减少人为错误；

5、自动电镀生产线可减少药液及水洗水的带出，减少了用水量，符合环保清洁生产的要求，使工作环境大为改善；

6、调节生产线的运行速度，可对电镀时间进行少量调节；

7、相对投资少，投资效益高。

Usages:

◆ Fit for the hole process of the pre-treatment, plating and after-treatment of hanging-mode plating.

◆ Fit for treating the medium and small size work pieces.

◆ It is applicable in producing large quantities of work pieces under 15kg.

Advantages:

1.  The Electromotor adopts transducer-controlled method, which works stably and safely.

2.  Be able to work continuously and constantly, which increase the efficiency and maximizes the output.

3.  Since the time of each working procedure is fixed in the production process, the quality of work pieces is stable.

4.  Instead of manual work, heavy hangers are lifted automatically which enable to reduce intensity of labour, labour cots and minimizes human errors.

5.  Be able to reduce the dragout and waste water through the plating process, which can lower pollution and waste of resources and meet the need of cleaner production.

6.  Be able to adjust the speed of the production line and to do the minor adjustment for the time of plating.