用途

◆  适用于挂镀前处理及后处理过程中的过水清洗工艺。

特点

1、传动电机采用变频器控制，运行平稳可靠；

2、控制采用PLC程控系统，配置有人机操作控制界面，整个清洗过程循环反复，性能可靠、操作方便；

3、连续作业，生产效率高，产量大；

4、生产过程中，工艺固定，工件品质稳定；

5、相对传统手工电镀，大大降低了劳动强度，节省劳动力，可减少水洗水的带出，从而减少了用水量，符合环保清洁生产要求；

6、生产线的设计合理，结构紧凑占地面积小，并可使工作环境大为改善；

7、保护采用进口接近开关，行程开关多重保护，保证运行可靠，运行速度、工艺时间可根据需求调整；

8、人机操作控制界面可显示工作实时工作状况，故障发生时可显示故障名称及处理方法，操作、维修方便、简捷。

Usages:

◆ Fit for the cleaning process for both of the pre-treatment and after-treatment of hanging-mode plating.

Advantages:

1.  The Electromotor adopts transducer-controlled method, which works stably and safely.

2.  With PLC controlled system and computer-controlled panel adopted, the controlling system makes the whole electroplating process smooth and stable. Aand the operation is easy and convenient.

3.  Be able to work continuously and constantly, which increase the efficiency and maximizes the output.

4.  Since the time of each working procedure is fixed in the production process, the quality of work pieces is stable.

5.  Instead of manual work, heavy hangers are lifted automatically which enable to reduce intensity of labour, labour cots and minimizes human errors.

6.  The well-designed production lines occupy small area, improving the working environment.

7.  By using proximity switches and travel switches safety of the whole process is guaranteed. The producing speed and the electroplating time can also be adjusted as required.

8.  Using Automatic Controlled Method. PLC-controlled system is applied to the controlling system, making the reliability and the stability of equipments high. At the same time, computer-controlled panel can also be added, making the operation more convenient and simple.